CPCWiki forum

General Category => Technical support - Hardware related => Topic started by: blackdalek on 03:37, 21 January 18

Title: Project box/case for Joystick Splitter? (KMTech)
Post by: blackdalek on 03:37, 21 January 18
Hi,

Does anyone on this forum sell a plastic case to fit around Kevin's (KMTech) joystick splitter board?
I'm afraid I'm going to short something out


Thanks ;)

Title: Re: Project box/case for Joystick Splitter? (KMTech)
Post by: blackdalek on 01:58, 28 February 18
I guess one doesn't exist.
I'll just have to make one myself if I want one ;)
Title: Re: Project box/case for Joystick Splitter? (KMTech)
Post by: Bryce on 09:26, 28 February 18
Without a picture, link or at least the dimensions it's hard to give any suggestions.

Bryce.
Title: Re: Project box/case for Joystick Splitter? (KMTech)
Post by: blackdalek on 06:25, 08 March 18
It's the one made by @Kevin Mount (http://www.cpcwiki.eu/forum/index.php?action=profile;u=1564)  who is a member of this forum but hasn't been active since 2016.

http://www.kmtech.co.uk/

https://www.ebay.co.uk/itm/Amstrad-CPC464-Joystick-Splitter-Diode-Type-3-Fire-Button-Support-KMTech-/112415732194?hash=item1a2c7ff1e2

The PCB measures approx. 50mm x 28mm

I just thought someone here might have made an enclosure for it, but it's not important.
Title: Re: Project box/case for Joystick Splitter? (KMTech)
Post by: Bryce on 08:36, 08 March 18
Wow, that's a big PCB just for 10 diodes! I don't think anyone has made a custom case, but it's a rectangular PCB, so you should be able to find a generic box you could modify.

Bryce.

Edit: Something like this: https://www.reichelt.de/Etuigehaeuse/SP-2043-SW/3/index.html?ACTION=3&LA=2&ARTICLE=33832&GROUPID=7716&artnr=SP+2043+SW&trstct=pol_0
Title: Re: Project box/case for Joystick Splitter? (KMTech)
Post by: blackdalek on 08:44, 08 March 18
That's what I figured too. Been looking through the cheap plastic project boxes on ebay from china.
Powered by SMFPacks Menu Editor Mod