Print Page - Schneider CPC 464 Problem

Title: Schneider CPC 464 Problem
Post by: Wapitiacht2777 on 19:27, 13 April 17

Hello! I have a Problem with my Schneider CPC 464 in the Video is the Problem showed!

I hope someone can help me thanks!

Title: Re: Schneider CPC 464 Problem
Post by: CanonMan on 19:52, 13 April 17

That's what happens when the sync signal doesn't get through to the monitor.

Title: Re: Schneider CPC 464 Problem
Post by: Wapitiacht2777 on 20:15, 13 April 17

Okey, and how can i fix it?

Title: Re: Schneider CPC 464 Problem
Post by: Bryce on 12:21, 14 April 17

Try cleaning the contacts in the monitor socket of the CPC. If that doesn't help you've a break in the curly wire and you'll need to replace it. It may also be bad solder joints on the monitor socket, so check that first too.

Bryce.

CPCWiki forum

General Category => Technical support - Hardware related => Topic started by: Wapitiacht2777 on 19:27, 13 April 17