Didnt get Gryzor to run with M4Board

[Tormentor22]

Hey Folks,
I tried different versions of gryzor. Sometimes the game crashes on Startscreen, other versions saying it needs 128k (I have a 6128) and others charades directly.
I have the lower rom on slot 31.
Infuse a M4Board and I'm not very familiar with the CPC because I use most of the time C64s and Amigas. Sponsored for this maybe stupid question.

[SkulleateR]

You got the modified lower rom installed on slot 31 ?? Without it I cannot even get to the title screen ...


After that ... yes, it's a bit fragile but as soon as you get into the game (press fire quickly after getting into main screen) the game works for me ...

[XeNoMoRPH]

Hey Folks,
I tried different versions of gryzor. Sometimes the game crashes on Startscreen, other versions saying it needs 128k (I have a 6128) and others charades directly.
I have the lower rom on slot 31.
Infuse a M4Board and I'm not very familiar with the CPC because I use most of the time C64s and Amigas. Sponsored for this maybe stupid question.

try this : http://cngsoft.no-ip.org/gryzorex.zip

[Tormentor22]

Thank you guys. I will check it out this evening.

[Bryce]

Here you go. Gryzor running with an M4 Board*.... 

Bryce.

*Yes, it's a slow day today.

[Shaun M. Neary]

Oh no Bryce, no...

[Bryce]

I'll grab my coat...

Bryce.

[Tormentor22]

 

[Tormentor22]

So i tried the Version XeNoMoRPH shared and i get the same behaviour. On main screen pushing fire button nothing happens. Do i press the space bar, i get a blue screen and the machine freezes. I attached a picture of my rom configuration. Maybe there is somethign wrong?!

[SkulleateR]

Did you try to start it without the M4 frontend ? I don't see anything wrong in the config ... I use the M4 on a 464 with Dk'tronics ram expansion but I could set up my 6128 tomorrow for testing ....

[XeNoMoRPH]

plan B: use this : https://files.fm/u/fvzpf6bsr

works fine, tested on my M4. 

[Tormentor22]

Did you try to start it without the M4 frontend ? I don't see anything wrong in the config ... I use the M4 on a 464 with Dk'tronics ram expansion but I could set up my 6128 tomorrow for testing ....

Yes i did try it. Same behaviour.

[Tormentor22]

The file doesnt work,too. Maybe stupid question. Do i have to upload the m4 rom or is this done by the Firmware? And if not, where do i get it. Im. Ot sure if there is a rom file in slot 7(nr6).

[XeNoMoRPH]

The file doesnt work,too. Maybe stupid question. Do i have to upload the m4 rom or is this done by the Firmware? And if not, where do i get it. Im. Ot sure if there is a rom file in slot 7(nr6).

Can you record one vídeo , loading Game ?

[Shaun M. Neary]

Works fine for me, no modified lower rom with m4fe in slot 5?


Also on a CPC6128, CRTC 2

[TotO]

@Gryzor Can you run with the M4 board?

[Tormentor22]

Works fine for me, no modified lower rom with m4fe in slot 5?


Also on a CPC6128, CRTC 2

I have the mod. Rom In Slot 31.


I will do a video later.

[Shaun M. Neary]

Try removing it and putting m4fe in slot 5.


Also what slot is the m4 rom?

[Animalgril987]

Works on my 464 with M4.
OS 1.1 in slot 31, BASIC 1.1 in slot 0. M4 ROM is in default slot ( 6 or 7( @Duke  will know)).

[Gryzor]

@Gryzor Can you run with the M4 board?

Unfortunately, pending a move and renovation all my stuff is under the stairs😓

[Tormentor22]

Where do I get the m4 rom? From the official site? Maybe someone have a link?

[Shaun M. Neary]

Where do I get the m4 rom? From the official site? Maybe someone have a link?

See where the rom number at the top is at 6?
Change it to 7


Good luck!

[Devlin]

try this : http://cngsoft.no-ip.org/gryzorex.zip

(apologies for the off-topic) this version also runs on the usifac2 (and works on 464 w/o ram expansions)