ANSI Telnet for the M4 Board

[kolleykibber]

Thanks @St-BeidE(DE/GB) Appreciate the testing. I've paused work on this for now, but I agree, it should work properly with the  Amstrad BBS

The way I test is to use 'script telnet.log' from unix which allows me to record a telnet session, then I use a little c prog to setup a telnet server and serve the log back to the amstrad client. Thing is, that works fine and the avatar is printed correctly and the cursor appears underneath the user info. So I think the issue is in the waiting for a key press after the avatar is shown on the bbs. The ANSI cursor reposition code (CUP/HVP) (ESC 14;1h) is incorrectly setting the row to 1, instead of 14.  I'll take another look over christmas, but if anybody has any ideas ...

[makinavaja]

Nice work!
I just tested it with bbs.hispamsx.org and had few issues, but 100% good compared to the other telnet we had before!
So, good work and thank you very much!

[XeNoMoRPH]

[Prodatron]

Hey, Duke is back with a new video!

[Galatronic]

Hi everybody, any chance to run it with the USIFAC first version + esp8266 module? I have been tried the attached software used to connect the board to the lan to share files with a PC, I have connected an ESP8266 module with the Juno firmware and I'm able to initialized the modem, connect it to my wireless network, and connect a bbs @ 2400 bps  but unluckily the software is not a real terminal so I can receive the pages in ascii mode only. I'm looking for a graphic terminal to connect the USIFAC 1 + esp8266 to the wifi network and browse the bbs' . many thanks