Best way to exchange data with 9512

[vagant]

Hi,

I am a happy owner of 9512 with 3" floppy and all is great but what's the easiest way to exchange data? I have NC100, NC200 and this is easy using serial cable etc.

- gotek - most ready or documented solutions are for 8256/8512. Is there 100% bullet proof way to hook gotek to 9512? Is there a place I could buy it?

- hooking up 3" to PC - I found description and understand I need to modify a cable, swap power and with additional software this should work?

- uIDE - that would be great but can't find any

- LocoLink - while there is software on eBay I can't find any physical cables

- wifi solution - this is also dedicated to 8 series

Is there anything else? 
What are you using?

Cheers
M

[Mark_wllms]

Why not get a USB RS232 cable and use serial from the PC?

[vagant]

 But how do I connect to PCW?

[Mark_wllms]

But how do I connect to PCW?

Sorry, I misunderstood. I thought you were saying you had a PCW serial interface.
I believe it is possible to add a gotek as a second drive on the PCW 9512, but I cannot confirm.

[GUNHED]

Connecting a Gotek work in the same way for all PcW. Just care about the right orientation of the flat cable.

If you have no B-Drive: Use the HxC or Gotek :-)

[vagant]

So I can simply swap gotek with no issue and exactly the same cables/connections between 8512 and 9512? 

[GUNHED]

Yes, I would say so. But consider 3" plugs and 3.5" plugs are different. Use a manual for 3" drives please.

[vagant]

Thanks! 

[GUNHED]

You are welcome!