Hi
Yesterday I fired up the 9512. It booted perfectly first time, and I did a few DIRs in CP/M to check what was on a disk. I left it running for a while, then powered down. So far, so good!
Problem is, it will not switch back on! I have checked the on-board fuse and plug fuse and they are both OK. Looking at the power board, it is merged into the VDU board and I am not comfortable poking around with it. I cannot see anything wrong. Has anyone got a schematic?
Ah! I thought it was the power switch and pulled it. Testing it on the bench indicates no problems. I refitted it but the machine is still dead. I'm no expert with these power supplies, but I bet mine's had it. :(
Get the same problem, looking at pictures of the power supply seem to be the same as the 8512.
You can follow my post still don´t fixed the psu but im kinda half way there.
Got amstrad pcw 8256 but the fun don't lasted very long ...... :O (http://www.cpcwiki.eu/forum/nc100-nc200-pcw-pda600/got-amstrad-pcw-8256-but-the-fun-don%27t-lasted-very-long-o/)