Hi All
Has any body connected an Amstrad Monitor CTM644 to an Amiga (500)
Does it work etc
Thanks. Ray
Hi Ray,
I found this old post.
http://www.cpcwiki.eu/forum/amstrad-cpc-hardware/amstrad-ctm664-to-scart/
Cheers,Shane
I connected my CTM644 to an Amiga 500 once. Worked fine, although a slightly fuzzy image.
Connecting an Amiga 1200 gave wrong colours though.
@00WReX (http://www.cpcwiki.eu/forum/index.php?action=profile;u=518)
@mr_lou (http://www.cpcwiki.eu/forum/index.php?action=profile;u=96)
Thanks for the thoughts, link.
I will go ahead and make up the cable and add a 330 Ohm resistor in series with the sync line.
I wanted a test monitor that I could use for both CPC and Amiga.
Thanks. Ray
Then a 1084 would probably be a better idea, to be honest...
It works but the monitor is low res.
Quote from: Gryzor on 14:21, 12 February 19
Then a 1084 would probably be a better idea, to be honest...
Of course, but soo difficult to get these days...
A bit of a necro-answer, but yep, I did it for quite a long time. It worked well for me, to be honest :D
Quote from: ||C|-|E|| on 01:36, 26 March 19
A bit of a necro-answer, but yep, I did it for quite a long time. It worked well for me, to be honest :D
Thanks.
I have made the cable up, I will test it this week.
Ray
With the A500 it should be totally fine :) I am actualky myself working a bit on a 644 to use it not only with the CPC but with the Megadrive.