Quote from: Bryce on Today at 13:40Well, well, that's all needed for good music.Quote from: Prodatron on Yesterday at 15:48Quote from: Bryce on Yesterday at 11:29I suppose it's cool because it hasn't been done before.A radio for the CPC has been done already around 2017, it is called SE-One and produced by Hans/TMTLogic. There was both an MSX and a CPC version, I still have the latter one:
You cannot view this attachment.
Beside playing FM radio...
https://www.youtube.com/watch?v=vvlGBS3nNiY
...it was fully compatible to the old MP3MSX hardware (like the SF3 etc.) and so was able to play MP3s as well.
Indeed TMTLogic produced a DAB radio later as well. Unfortunately his website is a little bit limited now, but there are links to a huge Google Docs repository.
There are players for both the FM and the DAB radio hardware in SymbOS, developed by EdoZ:
http://www.symbos.de/appinfo.htm?00053
http://www.symbos.de/appinfo.htm?00052
But I guess it's not compatible to this new hardware.
Wow, that's a massive amount of components just for a radio! Did it have a whole list of further features?
Bryce.
Quote from: SerErris on Today at 12:46I am not sure I do understand what you mean by stopping GA, GA will only stop if you stop the clock.Take a look at the illustration in post no. 100. GA stops itself due to the Lo signal on pin 1 of 244. This freezes the clock generator. I'll never believe you could be as blind as Bryce It's not like you.
Quote from: VincentGR on Today at 13:411000x is the turbo modeGo to the General tab in winape and look towards bottom right and you'll see a tick box labelled Turbo mode. That's what I use.
At least what is written on the right down corner.
Quote from: Bryce on Today at 13:35I'm starting to think that this is some sort of never ending April fools joke..Then prove to him that his memory is faulty. So far I have found out that the 3rd byte of the Rom has the value 61 instead of 89. If at all he did it well with 3 people. For now, it turns out that z80 writes to frames. And that the ram has the correct contents. Maybe you could stop being mean and start helping.
Quote from: McArti0 on Today at 07:12Have you often confirmed that pin1 244 is 0?I just bought some hook probes (now that I know that the are suitable) and evicted my family members from the team.
Quote from: SerErris on Today at 12:46I am not sure I do understand what you mean by stopping GA, GA will only stop if you stop the clock. Otherwise it will continue to output catch clock an will send RAS CAS to memory. And that will influence what you see on the right side of LS244.I do have an oscilloscope now (the one that you suggested), if that gives more options to try.
You may hunt a ghost here esp. with the only tool available being a voltmeter.
Also if you see 1.5V on the left side, you have either not stopped the CPU or something is influencing the D7 line.
And again a Voltmeter is not good to troubleshoot digital logic.
Page created in 0.134 seconds with 18 queries.