Quote from: Bryce on Today at 11:29I suppose it's cool because it hasn't been done before.A radio for the CPC has been done already around 2017, it is called SE-One and produced by Hans/TMTLogic. There was both an MSX and a CPC version, I still have the latter one:
Quote from: SerErris on Yesterday at 12:49The original design for the B drive on a 6128 was to use the normal FD-1 with a normal cable. So the 6128 is indeed prepared for the 5V lines. Also those lines are anyhow signal lines with active low. So the only problem would be if the CPC would pull them down. But as that never happens it is not a problem that they are high. There is no such thing like power injection. It is power will get pulled. And as this is correct voltage level even if it would be connected to something that is internal 5V it would not damage anything.
So from single point of view those lines are unused in the CPC and only used for power supply on DDI-1.
Quote from: Nich on 15:17, 27 April 24Yeah unfortunately the forum doesn't do that, I'm afraid. I could dig into the db of course and do manual queries, but it requires quite some looking aroundQuote from: ZorrO on 08:14, 27 April 24Only 50 people reading this forum? Come on!There are currently 3,725 registered users on the forum, but it would be an interesting exercise for @Gryzor to analyse how many of them are currently active (i.e. have logged in within a certain period of time).
Quote from: Gryzor on Today at 07:55Whaaaat? What's this?!nothing spectacular. It's a FM module that is controlled by the CPC. I would expect a simple address decoding logic activates the FM IC which gets the data from the data bus. The IC does all the radio logic including sound output.
Page created in 0.045 seconds with 18 queries.