Recent posts

#1

Technical support - Hardware related / Re: CPC 6128 - white screen, b...

Last post by eto - Today at 15:37

1) iorq to Ready/wait (better by diode) 

what will that do?

#2

General Discussion - Introductions / Re: Interview with James Higgi...

Last post by norecess464 - Today at 14:35

Thanks for sharing! I had a very great moment while reading the interview. The questions were really pertinent and the answers, very well detailed! And thanks too for the English translation.

#3

Applications (CPC and CPC-related) / Re: CubeMDOS / FAT16+FAT32-OS ...

Last post by HAL6128 - Today at 14:34

Don't know about the Problem, but instead of using the old Booster Rom you could try the more modern Firmware Rom 3.15 / 3.16?

#4

G

Applications (CPC and CPC-related) / Re: CubeMDOS / FAT16+FAT32-OS ...

Last post by Galatronic - Today at 13:41

Hi all, I'm experiencing problems using Cubemdos and 32RomBooster roms togheter, on a megaflashrom card. They seems to can't work togheter, I have placed Cubemdos on slot 6 and Booster on slot 15, I have to deactivate Booster rom to allow Cubemdos to works fine, otherwise only the booster rom is detected. Any tip about?  I'm using a cyboard (SF2 clone) + Megaflahrom + 1mb ram expansion.Thanks

#5

Technical support - Hardware related / Re: CPC 6128 - white screen, b...

Last post by McArti0 - Today at 13:26

@eto 

1) iorq to Ready/wait (better by diode) 

2) start cpc
        Z80 executes LD BC,#7F89. OUT(C),C
        OUT Produces iorq which does an eternal wait.

3) GA reads the number 89h a million times a second.

4)  When the first clock inverter is blocking by HI or Lo.           The clock stops working.
         Attention. The old mainboard has the first inverter on pin 5 of the 74hcu04 but the new one on pin 13.

5) When connected  pin 1. 244 to pin 5 (13) of the first clock inverter, the clock will stand and GA will be stopped in its tracks. If we draw Lo on pin 1 244, we have stopped CPC from 89h on the z80 side and gate 244 is open. (Of course, the diode helps connect only the LO state to the clock)

6) You can easily check whether the number 89h is also on the GA side on the date lines.

#6

Technical support - Hardware related / Re: Second Button and appropri...

Last post by GUNHED - Today at 13:14

CyberChicken / SpaceChicken: 2. Feuerknopf schalten das Waffensystem um.

#7

Hardware / Re: Expansions Port

Last post by GUNHED - Today at 13:13

Wenn es ein bisschen mehr sein darf... Eine Platine für bis zu 7 Erweiterungen wurde vom LambdaMikel entworfen, siehe Deutsches Forum.

#8

Applications (CPC and CPC-related) / Re: New version of ParaDOS fin...

Last post by GUNHED - Today at 13:06

Well, I see, the source code is on the WinApe homepage. Nice! 
Which assembler shall be used?

#9

J

Technical support - Hardware related / Re: Amstrad GX4000 - Video Pro...

Last post by josepprada - Today at 11:51

Thank you Andy!

I'm proud to join the club! 

#10

Games / Re: The Key, a A "full" point ...

Last post by eto - Today at 11:50

Mmmh, the puzzle is pretty simple and I get a logical answer, but the subdomain doesn't seem to be working. Is it just me?

Yeah, I struggled there too. However the diagram is just misleading. It looks like you need to change the subdomain but all you need to do is to replace the path after the server address.