- Welcome to CPCWiki forum.
The ultimate Amstrad CPC community!
News:
Printed Amstrad Addict magazine announced, check it out here!
Recent posts
#1
Ghosts'n Goblins looks good.
If you have issues loading Relentles, you can try Edge Grinder and Super Edge Grinder. These are also two candidates that rarely work on anything but a CRT.
If you have issues loading Relentles, you can try Edge Grinder and Super Edge Grinder. These are also two candidates that rarely work on anything but a CRT.
#2
@eto I did some of the tests you recommended. Could you take a look if it looks OK? Please ignore noise (flickering pixels) and sometimes screen shifted to the right - I am already working on these issues.
IMO Vertical overscan (Ultima Ratio) looks OK. I also tried horizontal overscan with Super Cauldron and it was OK.
Scrolling it much more interesting. I tried Ghost'n'Goblins and I think they are OK, but please take a look, too. Sorry for blurry video, my camera went out of focus.
Smooth vertical scroll (Mission Genocide) also looks OK, but sometimes a little bit choppy. I am not sure if it is expected.
Horizontal smooth scroll totally does not work. I tried Skate Wars, and it was a total mess. I am just reading about tricks with HSync here: https://shaker.logonsystem.eu/ACCC1.7-EN.pdf and I have some ideas how to fix it, but first for sure I will need to use csync from Gate Array instead of Hsync from CRTC.
Besides that I found a lot of issues with how I handle or do not handle syncs. e.g. Mission genocide has less lines (305 it total), so instead of hardcoded value I will need to start actually use VSync. And BTW how I use HSync also sucks - sometimes screen is shifted to the right.
I did not manage to load Relentless yet, but I believe issues will be similar to Skate Wars.
IMO Vertical overscan (Ultima Ratio) looks OK. I also tried horizontal overscan with Super Cauldron and it was OK.
Scrolling it much more interesting. I tried Ghost'n'Goblins and I think they are OK, but please take a look, too. Sorry for blurry video, my camera went out of focus.
Smooth vertical scroll (Mission Genocide) also looks OK, but sometimes a little bit choppy. I am not sure if it is expected.
Horizontal smooth scroll totally does not work. I tried Skate Wars, and it was a total mess. I am just reading about tricks with HSync here: https://shaker.logonsystem.eu/ACCC1.7-EN.pdf and I have some ideas how to fix it, but first for sure I will need to use csync from Gate Array instead of Hsync from CRTC.
Besides that I found a lot of issues with how I handle or do not handle syncs. e.g. Mission genocide has less lines (305 it total), so instead of hardcoded value I will need to start actually use VSync. And BTW how I use HSync also sucks - sometimes screen is shifted to the right.
I did not manage to load Relentless yet, but I believe issues will be similar to Skate Wars.
#3
Quote from: Bryce on Today at 11:29I suppose it's cool because it hasn't been done before.A radio for the CPC has been done already around 2017, it is called SE-One and produced by Hans/TMTLogic. There was both an MSX and a CPC version, I still have the latter one:
You cannot view this attachment.
Beside playing FM radio...
https://www.youtube.com/watch?v=vvlGBS3nNiY
...it was fully compatible to the old MP3MSX hardware (like the SF3 etc.) and so was able to play MP3s as well.
Indeed TMTLogic produced a DAB radio later as well. Unfortunately his website is a little bit limited now, but there are links to a huge Google Docs repository.
There are players for both the FM and the DAB radio hardware in SymbOS, developed by EdoZ:
http://www.symbos.de/appinfo.htm?00053
http://www.symbos.de/appinfo.htm?00052
But I guess it's not compatible to this new hardware.
#4
2.15.0.0
Hello and thanks for the game.
I will try it this week on real machine.
I see a great effort has been made on music and I want to tell how much I appreciate that.
#5
Depending on the cost why not both?
#6
Technical support - Hardware related / Re: cable DDI-1 for CPC 6128
Last post by Bryce - Today at 11:38Quote from: SerErris on Yesterday at 12:49The original design for the B drive on a 6128 was to use the normal FD-1 with a normal cable. So the 6128 is indeed prepared for the 5V lines. Also those lines are anyhow signal lines with active low. So the only problem would be if the CPC would pull them down. But as that never happens it is not a problem that they are high. There is no such thing like power injection. It is power will get pulled. And as this is correct voltage level even if it would be connected to something that is internal 5V it would not damage anything.
So from single point of view those lines are unused in the CPC and only used for power supply on DDI-1.
Not quite correct. The lines used for the 5V supply were otherwise GND lines. They aren't connected on the 6128 side to avoid a short circuit and on the DDI-1 the connector nearest the expansion has those pins removed from the connector to avoid damage if you were to add a second drive.
Bryce.
#7
I suppose it's cool because it hasn't been done before. There are lots of single chip Radio IC's around with digital tuning etc to do this. Unfortunately he doesn't show the other side of the PCB to give it away. I think I would have made a DAB radio though. With an AM/FM antenna that close to a CPC and monitor, you are mainly going to receive the noise coming from the computer.
Bryce.
Bryce.
#8
General Discussion - Introductions / Re: What computer did you have...
Last post by Gryzor - Today at 09:22Quote from: Nich on 15:17, 27 April 24Yeah unfortunately the forum doesn't do that, I'm afraid. I could dig into the db of course and do manual queries, but it requires quite some looking aroundQuote from: ZorrO on 08:14, 27 April 24Only 50 people reading this forum? Come on!There are currently 3,725 registered users on the forum, but it would be an interesting exercise for @Gryzor to analyse how many of them are currently active (i.e. have logged in within a certain period of time).
#9
If the audio output is connected to the sound line on the expansion port, the radio would be heard in the CPC speaker.
#10
Yes, that much is clear, nobody said it's revolutionary in a technical way, but still .