Print Page - Diode replacement on 6128 v3

Title: Diode replacement on 6128 v3
Post by: brochi on 09:44, 06 May 20

Hello, I found a problem with my 6128 v3 with Z80330 motherboard. I discover a small area well oxidized, a diode is even invaded with rust and its neighbor follows it closely. Scratching this rust I realize that the D302 diode (especially one pin) is actually completely devoured and cut. According to the technical manual these diodes are 1S2472 and I wanted to know if I could replace them with 1N4148 that I have in stock. Thanks in advance.

Title: Re: Diode replacement on 6128 v3
Post by: Bryce on 10:39, 06 May 20

Yes, it's a general purpose signal diode, 1N4148 will do fine as a replacement.

Bryce.

Title: Re: Diode replacement on 6128 v3
Post by: brochi on 10:47, 06 May 20

Great, thank you very much for your answer.

Title: Re: Diode replacement on 6128 v3
Post by: Patrick on 13:57, 06 May 20

Welcome Brochi !
;D

Title: Re: Diode replacement on 6128 v3
Post by: brochi on 13:59, 06 May 20

Quote from: Patrick on 13:57, 06 May 20
Welcome Brochi !
;D

Thank you Patrick 😊😊😊

CPCWiki forum

General Category => Technical Support - General => Topic started by: brochi on 09:44, 06 May 20