4 Data Input |3 1|
5 Data Output \5_2_4/
* The two Remote Control pins are connected to a relay inside of the CPC, the relay becomes closed when the /Motor On bit in PIO Port C is set to zero, ie. the cassette recorder may use the relay to switch its power suppy supply on and off when Play and/or Record is pressed - this is of course supposed for low-voltages only. You have to connect both pins to the remote connector of the cassette recorder.
* The CPC 6128+ does not include a Cassette Connector.
* [[Draysoft Doubler]] (external tape input, for tape-to-tape transfers)
== Connector on Cassette recorder == 1 (Left) Input __ __ 2 Ground / - \ 3 (Left) Output | | 4 (Right) Input |3 1| 5 (Right) Output \5_2_4/ On mono cassette recorders, pin 4 and 5 can be missing. == Adapter cable == Computer Recorder +---- 1 Input (l) Output 5 ---------------------+---- 4 (Input r) Ground 2 -------------------------- 2 Ground Input 4 ---------------------+---- 5 (Output r) Remote 1 --------------- +---- 3 Output (l) Remote 3 -------------- \ \ \ \ \--------- 1 Remote-jack \---------- 2 Remote-jack [[Category:HardwarePeripherals]][[Category:CPC Internal Components]][[Category:DATA Storage]] == See Also == * [[Read error codes]]