Kersten PC Emulator

From CPCWiki - THE Amstrad CPC encyclopedia!
Revision as of 10:10, 14 November 2011 by Bryce (Talk | contribs)

Jump to: navigation, search
The emulator and the connection cable for the CPC

Also known as the PCE!

Text mostly translated into English from an article from the German magazine HAPPY COMPUTER):

Article about the PCE

The new MS-DOS Emulator transforms every CPC into an IBM-compatible PC. Does this transformation payoff, or are you better off buying a completely new PC?

The rumours about a MS-DOS emulator for Schneider computers has been around for a long time but we have had to wait for it until now.

Our practical test will show if it has been worth the wait. The first optical impression of the emulator hints its purpose - the emululator is housed in a half size IBM-cabinet. Hidden inside is an almost complete computer based on the Intel 8088 processor, 512Kb ram, one or two 5 1/4 inch disc drives (40 track, double sided, 360Kb capacity, DOS-Format) and one slot for hardware expansions (Standard IBM cards in long form (ISA?))

The emulator is connected directly to the expansion bus of the CPC via a cable. (A version for the Joyce has also been announced and will appear at the end of this year)

After connection to the emulator the CPC only serves as input/output terminal. So at this moment the CPCs sole purpose is to let the emulator access its screen and keyboard.

It is planed to deliver some drivers, that in the future will make it possible to exchange data between CP/M and MS-DOS, and that will make the memory and drives of the emulator accessible to the CPC.

The software for this will be decided by the manufacturer based on customer demands.

More important than show of good will is the actual performance of the emulator.

After unpacking the emulator a desperate search for the MS-DOS system discs starts. Does MS-DOS reside inside the emulator on a rom? Wrong. MS-DOS is not included in the price.

Single MS-DOS licenses is almost impossible to get around, so the next task is to visit a friend and “borrow” a copy of the MS-DOS system discs!

  • The benchmark test:

After the successful acquirement of the MS-DOS system discs, and connecting the cable to the CPC the MS-DOS system disc was then placed in the emulators drive. Both systems were then switched on.

On the CPC we typed the command |PC and after a moment the screen changes dramatically. The emulator ram test and the boot process of MS-DOS is shown on the CPCs monitor.

Even hardened professionals won't believe their own eyes when suddenly the prompt of MS-DOS appears on the CPCs monitor.

...

After running several well-known MS-DOS programs, our last scepticism disappears: The emulator keeps its promises!

What is a practical test without a benchmark? And that’s how we will compare the emulator to other PCs

To run the benchmark we use this small BASIC program:

100	DEFINT A-Z
110	T!=TIMER
120	DIM X(1000)
130	K=0
140	K=K+1
150	GOSUB 200
160	X(K)=Z
170	IF K<1000 THEN 140
180	PRINT TIMER-T!
190	END
200	Z=K*2+3
210	RETURN

The emulator with GW-Basic runs the program in 8.5 seconds. A Commodore PC-10 with the same Basic interpreter is slightly slower (9.1 seconds)

The original IBM-PC with BasicA is even slower (11.6 seconds).

A dramatic difference can be seen when compared to the fast Schneider PC with Basic 2 (3.2 seconds)

No a direct test like this, is of course not fair as the preconditions are not the same. Firstly the processors are different (Intel 80860 in the Schneider PC and the 8088 in the emulator and the IBM-PC) and the Basic interpreters are also different. Even on MS-DOS PC the Basic dialects makes it difficult to exchange programs. For example; the BasicA runs only on the IBM PC, because the interpreter calls routines only stored in the original IBM rom.

Our experience in using different software confirms our positive impression of the speed. It is in fact possible to work professionally in combination with the CPC and emulator. To do this we recommend the emulator version with two drives: Firstly there is software that only runs on a PC with two drives, secondly it feels much more comfortable and the work runs much smoother with two drives.

......

  • Last minute:

Just before deadline we received news from the emulator manufacturer. The version of the emulator wich we tested has been completely sold out and no more of this version will be built.

Instead a new version will be released. This new generation will have 256Kb main memory and one drive.

The new version also has a completely redesigned PCB. So that all components are on a single board. This makes the new version cheaper (to about 1098 DM) ...

Name: PCE

Nature: PC-Emulator for Schneider CPC Computers.

Prices:

PCE-II: 1995 DM (Two drives)

PCE-I: 1645 DM (One drive)

PCE: 1295 DM (without any drives)

Positive: Makes the Schneider CPC und Joyce IBM-compatible

Negative: No MS-DOS is delivered with the device

Technical specs

CPU: Intel 8088 (Clocked at 5MHz)
RAM: 512Kb
EXPANSION PORT: One standard IBM expansion slot ([[ISA]]?)
DRIVES:	5 1/4" Inch, 40 tracks double sided, 360 Kb

Pictures

What's the use of this ?

Actually this seems to be a complete PC minus the keyboard... the CPC being just a terminal/keyboard then, or is it not ?

The article lacks some info :

  • Is it a CGA display ? does it use the CPC monitor or does it need a proper PC monitor ?
  • Can it use the CPC diskDrive while in PC mode ?
  • Can it use the CPC's sound capabilities ?

Is the CPC mostly a Keyboard and a Graphic+Sound extension card...?


Weblinks

Happy computer article(German)

Some info courtesy of CPCRulez (French)

Article catalogue (German - Funkschau)