Vortex Disc Drives

From CPCWiki - THE Amstrad CPC encyclopedia!
Revision as of 09:35, 26 May 2022 by Poliander (Talk | contribs)

Jump to: navigation, search

A series of 3.5" and 5.25" floppy disc drives from Vortex providing up to 720K capacity (704K available).

S- and D-Drives (720K)

These are the very first generation of floppy disc drives from Vortex. They came in variants having either a single ("S" variant) or two ("D" variant) DS/DD 80-track drives installed (BASF 6138).

Variants

  • F1 - S Single 5.25" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11
  • F1 - D Double 5.25" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11
  • M1 - S Single 3.5" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11
  • M1 - D Double 3.5" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11


  • Vortex F1-D with CPC 6128 Interface

  • An anonymous box housing the controller board

  • Look inside the controller, a NEC 765 chip and VDOS upgraded to v2.0

  • Controller with mounted VDOS chip

  • F1-D Interface (CPC 664)

  • F1-D Interface Board (CPC 664)

  • F1-D Interface Board (CPC 664)

  • F1-D Interface Board (CPC 6128)

Second Drive Upgrade

Vortex offered an upgrade option that allowed an F1/M1-S single drive to be upgraded to an F1/M1-D dual drive. To do this, one simply had to install an additional drive in the free drive slot of the S-drive housing.

FDA-1 3" Drive Adapter

This adapter allowed to use an Amstrad 3" drive on Vortex F1/M1 setups connected to a CPC 464. Since only two drives can be used simultaneously, the 3" drive had to be manually selected first using RSX commands.

RSX Description
|S,1 Use 3" drive as drive A, upper Vortex drive is disabled
|S,2 Use 3" drive as drive B, lower Vortex drive is disabled
|S,0 Disable the 3" drive (default)

  • Adapter to connect an additional 3" disc drive in between a CPC 464 and a F1/M1

  • Inside the adapter box

  • Inside the adapter box (closeup)

FDC I/O Ports

All types of floppy disk controllers for the F1-S/F1-D/M1-S/M1-D range are based on the NEC 765 chip.

CPC 464:

Address Description
0xFB7E uPD control (R)
0xFB7F uPD data (R/W)
0xFA7E motor on/off

CPC 664/6128:

Address Description
0xFBF6 uPD control (R)
0xFBF7 uPD data (R/W)
0xFA7E motor on/off


Z-Drives (180K)

These are basic and less expensive low-capacity drives and were meant to be directly connected to a CPC 664/6128 or CPC 464 with DDI-1 (ie. on computers that already provide a floppy controller). Since these drives do not ship with a special controller, they do rely fully on AMSDOS and thus only 40 tracks can be accessed.

Variants

  • F1 - Z Single 5.25" drive with power supply with ribbon cable (does not come with interface containing FDC or VDOS)
  • M1 - Z Single 3.5" drive with power supply with ribbon cable (does not come with interface containing FDC or VDOS)


X-Drives (720K)

These are the latest drives from Vortex for use on CPC 464 with DDI-1 or CPC 664/6128 computers (ie. on computers that already have a FDC), so no own FDC was required anymore. Instead, a ROM module was supplied together with the drive, which provided VDOS 2.0-X. Only single-drive variants were available. The |S command (for accessing a third drive) is no longer used, the new |X command allows to swap drive A and B (same as X-DDOS from Dobbertin). These drives are well designed and strong. They are housed in a metal case with power supply (which has good protection with fuses) and have good quality drive mechanisms. The drive has jumpers on it that can be configured as needed.

Variants

  • F1 - X Single 80 track, Double Sided, 5.25" drive with power supply
  • M1 - X Single 80 Track, Double Sided, 3.5" drive with power supply
  • F1 - XRS same as F1-X, upgraded with RS232-C interface
  • M1 - XRS same as M1-X, upgraded with RS232-C interface


  • F1-X

  • F1-X backside

  • F1-X inside view

  • F1-X/M1-X manual and utility disk

  • M1-X

  • M1-X backside

  • M1-X backside, showing IDC connection

  • M1-X underside

  • M1-X inside view, showing the drive and power

  • M1-X inside view, close-up of the drive from above

  • M1-X inside view, close-up from the backside

X(RS)-Modul

The X-drives for the CPC 664/6128 are connected directly to the floppy port. To provide VDOS, a "X-Modul" had to be installed. This was a single-ROM board with VDOS 2.0-X and came in two versions, one of which providing an additional RS232-C interface ("XRS-Modul"). The version for the CPC 464 came with a chunky housing in which both the X(RS)-Modul and the DDI-1 had to be installed.

  • F1-XRS Interface (CPC 464)

  • F1-XRS Interface with DDI-1 installed (CPC 464)

  • X-Modul (CPC 6128)

  • X-Modul (CPC 6128) board

RS232 I/O Ports

The RS232-C interface of the -XRS modules were advertised to be compatible with Amstrad/Pace interfaces, but have only one channel (no channel B).

Address Description
0xFADC SIO data (R/W)
0xFADD SIO control (R/W)
0xFBDC 8253 counter 0 (R/W)
0xFBDD 8253 counter 1 (R/W)
0xFBDF Mode word (W)

VDOS

Vortex Disk Format

See VDOS: Vortex Disc Format

Retrieved from "https://www.cpcwiki.eu/index.php?title=Vortex_Disc_Drives&oldid=108700"