Changes

Jump to: navigation, search

Amstrad SSA-1 Speech Synthesizer

264 bytes added, 11:25, 13 January 2010
/* Technical Specs. */
== Technical Specs. ==
The clock frequency (passed to In the SSA-1, the SP0256-AL2 speech chip) is fixed, clocked by a 3.12MHz ceramic resonator (unlike the exact frequency similar dk'tronics device, where it is unknown (?clocked at 4MHz).
Uses The SSA-1 uses I/O port: [[I/O_Port_Summary|#FBEE]], of which (according to the manual) only A10,A4,A0 are decoded.
Port FBEEh READ- SP0256-AL2 Status: bit7 Status 1 (0=Speech Busy, 1=Ready/Halted) (SBY Pin, Speech BusyStandby)
bit6 Status 2 (0=Ready to Receive Data, 1=Busy) (/LRQ Pin, Load Request)
bit5-0 Not used (garbage, probably usually highz)
 Port FBEEh WRITE- SP0256-AL2 Allophone: bit7-6 Reserved (must be zero) bit5-0 Allophone number ;data  * A new allophone number can be send when Status.Bit6=0.* The allophone number should/must be in range of 00h..3Fh (6bit).* However, the whole 8bit databus is connected in the SSA-1. For details on the speech chip, see:
* [[SP0256]]
6,388
edits