Difference between revisions of "Amstrad Magnum Phaser"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
Line 58: Line 58:
 
Image:LightPhaser.JPG|Light Phaser
 
Image:LightPhaser.JPG|Light Phaser
 
Image:Amstrad lightgun.jpg|Light Phaser
 
Image:Amstrad lightgun.jpg|Light Phaser
File:Magnum-drawing.jpg|Drawing
+
Image:Magnum-drawing.jpg|Drawing
File:Magnum-package.jpg|Package
+
Image:Magnum-package.jpg|Package
File:NoPicture.gif|Inside of Interface/Gun showing the Trigger Button logic and Expansion Port pins (are there REALLY only 4 pins connected?)
+
Image:NoPicture.gif|Inside of Interface/Gun showing the Trigger Button logic and Expansion Port pins (are there REALLY only 4 pins connected?)
  
 
</gallery>
 
</gallery>
 +
 +
== Manuals ==
 +
 +
* [[Media:Magnum Light Phaser Games (UK) Instructions.pdf|Magnum Light Phaser Games Instructions]] {{EN}} {{PDF}}
 +
* [[Media:Magnum Light Phaser Games (FR) Instructions.pdf|Magnum Light Phaser Games Instructions]] {{FR}} {{PDF}}
 +
* [[Media:Magnum Light Phaser Instructions.pdf|Magnum Light Phaser Instructions.pdf]] {{SP}} {{DE}} {{FR}} {{EN}} {{PDF}}
  
 
[[Category:Input Device]] [[Category:Amstrad Products]]
 
[[Category:Input Device]] [[Category:Amstrad Products]]

Revision as of 07:11, 26 October 2011

The Magnum Light Phaser was released later on in the Amstrads' life, and retailed for £24.99 in the UK.

It came supplied with a cassette and a disk, both containing six games.

The main reason to buy this gun was for the excellent Amstrad conversion of Operation Wolf. Playing this with a light gun on your Arnold was the arcade experience people relished but rarely got back in the 80's.

The other supplied games were fun for a while, but by far the high point was Operation Wolf.

Technical

Connects to expansion port 50pin edge connector. Reportedly it uses only 4 pins: VCC, GND, LPEN, D7. Uh, that is, without decoding any address lines or /IORQ lines?

 Trigger Button  ---> Request via output to Port FBFEh, then check CRTC input
 Light Sensor    ---> CRTC Light Pen Input

To read the Trigger button (to be done during vblank):

 Port[BCxxh]=11h  ;select CRTC register 11h
 old=Port[BFxxh]  ;-get old value
 Port[FBFEh]=7Fh  ;\force an edge on the lpen input
 Port[FBFEh]=80h  ;/(depending on whether button is pressed or not)
 new=Port[BFxxh]  ;-get new value
 if old=new then ... else ...

Supported Games

Mastertronic released some more games with Magnum Light Phaser support, but they were mostly budget-type Spectrum ports.

All five releases were also available on the Megaplay 2 compilation.

Disc

Pictures

Manuals