Printed Amstrad Addict magazine announced, check it out here!
Started by gerald, 20:48, 09 October 12
0 Members and 1 Guest are viewing this topic.
Quote from: TFM/FS on 16:14, 10 October 12So, you added the capacitor the the Plus PCB?
Quote from: TFM/FS on 16:14, 10 October 12It would be interesting to see if this capacitor also solves the problems which has the sf2 with the Plus.
Quote from: TFM/FS on 16:14, 10 October 12How big is your RAM expansion?
Quote from: arnoldemu on 17:35, 10 October 12Does the ram expansion handle the c3 configuration?If so how did you implement it?
Quote from: gerald on 17:48, 10 October 12That is, C3 will not work on 464/664.
Quote from: 00WReX on 12:26, 11 October 12and once it's all sorted are you going to release details or maybe build & sell some ?
Quote from: IanS on 13:02, 11 October 12Yet dk'tronics managed to make it work Memory Expansion - Code 3Do you have any idea how they could have done it?
Quote from: gerald on 14:38, 11 October 12 512K FLASH is OK. However, slot 0 and 7 cannot be used (disabled by default in HW). Flash is programmed using a modified version of TFM ROM manager (Thanks for sharing the code !!! )
Quote from: gerald on 14:38, 11 October 12512K FLASH is OK. However, slot 0 and 7 cannot be used (disabled by default in HW). [...] Ability to remap FLASH slot 31 to low ROM.
Quote from: IanS on 15:59, 11 October 12How are you enabling write support, there doesn't appear to be any obvious switches. Are you using software write control?
Quote from: gerald on 14:38, 11 October 12Flash is programmed using a modified version of TFM ROM manager (Thanks for sharing the code !!! )
Quote from: Bryce on 16:07, 11 October 12I considered this on the MegaFlash, but in the end I chose to use a physical switch to be 100% sure that other hardware wasn't inadvertantly setting the write enable.
Quote from: Bryce on 16:07, 11 October 12@Gerald: Nice hardware, it'll be an impressive little device when it's finished.
Quote from: TotO on 16:05, 11 October 12If the ROM 0 can't be used, why not remaping it for the Lower ROM ? (instead of losing the ROM 31)
Quote from: gerald on 16:59, 11 October 12The flash used on the MegaFlash ... is easy to corrupt by accident if not write protected.
Quote from: gerald on 17:09, 11 October 12I would be even better if the Rom manager does the lock/unlock sequence automatically when programming/erasing a rom slot.
Quote from: TFM/FS on 17:13, 11 October 12Well, I actually thought about that... but in that case it would make the Flash in-accessible for other software like QCMD. And in France they do a remake of the MF, using a ROM which provides a simple !BURN command for people who like it easy (which don't know about SDP either).
Quote from: TFM/FS on 17:13, 11 October 12Well, but back to topic! I'm really curious what your card will be able to do at the end. I like the idea of the mass-storage option. If it would have a mouse port and an RTC then it would be the new SF2
Page created in 0.194 seconds with 23 queries.